CY7C1511V18, CY7C1526V18
CY7C1513V18, CY7C1515V18
Document Number: 38-05363 Rev. *F Page 11 of 32
Write Cycle Descriptions
The write cycle description table for CY7C1511V18 and CY7C1513V18 follows.
[2, 10]
BWS
0
/
NWS
0
BWS
1
/
NWS
1
K
K
Comments
L L L–H – During the data portion of a write sequence:
CY7C1511V18 − both nibbles (D
[7:0]
) are written into the device.
CY7C1513V18 − both bytes (D
[17:0]
) are written into the device.
L L – L-H During the data portion of a write sequence :
CY7C1511V18 − both nibbles (D
[7:0]
) are written into the device.
CY7C1513V18 − both bytes (D
[17:0]
) are written into the device.
L H L–H – During the data portion of a write sequence :
CY7C1511V18 − only the lower nibble (D
[3:0]
) is written into the device, D
[7:4]
remains unaltered.
CY7C1513V18 − only the lower byte (D
[8:0]
) is written into the device, D
[17:9]
remains unaltered.
L H – L–H During the data portion of a write sequence :
CY7C1511V18 − only the lower nibble (D
[3:0]
) is written into the device, D
[7:4]
remains unaltered.
CY7C1513V18 − only the lower byte (D
[8:0]
) is written into the device, D
[17:9]
remains unaltered.
H L L–H – During the data portion of a write sequence :
CY7C1511V18 − only the upper nibble (D
[7:4]
) is written into the device, D
[3:0]
remains unaltered.
CY7C1513V18 − only the upper byte (D
[17:9]
) is written into the device, D
[8:0]
remains unaltered.
H L – L–H During the data portion of a write sequence :
CY7C1511V18 − only the upper nibble (D
[7:4]
) is written into the device, D
[3:0]
remains unaltered.
CY7C1513V18 − only the upper byte (D
[17:9]
) is written into the device, D
[8:0]
remains unaltered.
H H L–H – No data is written into the devices during this portion of a write operation.
H H – L–H No data is written into the devices during this portion of a write operation.
Write Cycle Descriptions
The write cycle description table for CY7C1526V18 follows.
[2, 10]
BWS
0
K K Comments
L L–H – During the Data portion of a write sequence, the single byte (D
[8:0]
) is written into the device.
L – L–H During the Data portion of a write sequence, the single byte (D
[8:0]
) is written into the device.
H L–H – No data is written into the device during this portion of a write operation.
H – L–H No data is written into the device during this portion of a write operation.
Note
10. Is based on a write cycle that was initiated in accordance with the Write Cycle Descriptions table. NWS
0
, NWS
1
, BWS
0
, BWS
1
, BWS
2
,
and BWS
3
can be altered on
different portions of a write cycle, as long as the setup and hold requirements are achieved.
[+] Feedback
(28 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals